PARAMETERS | UNITS | RAC-19SH |
About MODEL | Type of AC : | Split / Window/Light Commercial/VRF/Chill | Details | Split |
Fixed Speed / Inverter | Fixed Speed |
Cool only/ Heat & cool | Cool only |
Product selling | Country name | Bangladesh |
Capacity: | Cooling capacity | Watt | 5275 |
Heating capacity | N/A |
Operating Conditions | Power supply | Rated Voltage & phase | Volts | 230V & Single |
Rated frequency | Hz | 50Hz |
Running Condition | Withstanding Operating conditions | °C | 20-43 |
Cooling Area | sq. ft | 160-180 |
Lowest running voltage | Volts | 170 |
Highest running voltage | 264 |
Cooling | Capacity at rated condition (If required) | Watt | 5275 |
Power consumption in rated condition | 1870 |
Performance | Cooling data | SEER/EER/COP (If any special requirement) | W/W | 2.82 |
Cooling Input Current | A | 8.85 |
Max. Input Current | 14.39 |
Indoor Unit Information | General | Indoor side airflow (High) | m3/h | 900 |
Indoor side noise level (High) | dB(A) | 47 |
Dimensions (L*W*H) | mm | 947x321x232 |
Packing (L*W*H) | 1025 x 400 x 300 |
Weight: Net & Gross | Kg | 12.5±0.5 & 15±0.5 |
Motor | Motor Type: Single-Phase Induction | Details | Induction (PG) |
Motors Mechanical output Wattage | Watt | 35 |
Capacitor | uF | 2 |
Indoor Fan speed (Turbo/High/Medium/Low) | r/min | 1200/1150/1100/1000 |
Thermal protector | Yes/ No | Yes |
Fan | Dimensions (Dia* Length) | mm | Φ108, L- 700±1 |
Material of Blades | Details | SAN 30% GF |
Evaporator | Rows * Tubes | No's | 2*18 |
Tube pitch (a) x row pitch (b) | mm | 21 x 12.7 |
Hairpin copper tube length | 749 |
Tube specification | ODΦ7.0 x 0.25+0.18 IGT |
Tube Material & Grade | Details | DHP COPPER, C12200 |
Fin spacing | mm | 1.2 |
Fin type | Details | Louvered |
Fin Material (Bare or Golden/Blue/Silver Coa | Aluminum (Hydrophilic Golden coated) |
Control board | Transformer Base/ SMPS Base | SMPS |
PU/ Protective layer | PU |
EMI/EMC compatible | NO |
|
Display PCB: LCD Display/ 7Seg Display/ LED indicators | LED Digit Display |
Swing Motors: Qty, Purpose | 2, Left/right, Up/Down |
Temperature sensor: Nos & Locations | 2, air inlet, Eva inlet |
Other | Filter Type | Mesh Filter |
Power cord & Plug | yes, 1.5 meter |
Connecting wire between IDU & ODU: Leng | meter | 3.5 |
Connecting tube(CU with insulation) between | 3±0.05 |
Outdoor | General | Outdoor side noise level (Turbo/High) | dB(A) | 55.12-High |
Dimension : L*W*H (Including foot & service | mm | 844 x 310 x 546 |
Packing: L*W*H | 900 x 372 x 610 |
Weight: Net & Gross | Kg | 35±1 & 39.5±1 |
Max. discharge/Suction pressure | MPa | 4.15/1.15 |
Compressor | Preferred Model | Details | ASL201GV-C7EU(Highly) |
Type: Fixed speed / Inverter | Fixed Speed |
Inverter Frequency Range: Min to Max | Hz | N/A |
Locked rotor Amp(LRA) | A | 50.0 A at 240 V |
Thermal protector | Yes/ No | Yes |
Overload Protector (Location) | Details | internal |
Capacitor (If applicable) | uF | 60 |
Fan motor | Motor Type: Single-Phase Induction | Details | Induction |
Motors Mechanical output Wattage | Watt | 35 |
Capacitor | μF | 3 |
Outdoor Fan speed | R/min | 850 |
Thermal protector | Yes/ No | Yes |
Unit Information | Fan | Dimensions (Dia* Hight) | mm | Φ400, H-115 |
Number of Blades | No's | 3 |
Material of Blades | Details | ABS 20%GF |
Condenser | Rows*Tubes | No's | 2*24 |
Tube pitch(a)x row pitch(b) | mm | 21 x 12.7 |
Coil length | 810 OR; 775 IR |
Tube outside & Inside diameter | ODΦ7.0 x 0.25+0.18 IGT |
Tube Material & Grade | Details | DHP COPPER, C12200 |
Fin Type | Slit |
Fin spacing | mm | 1.2 |
Fin Material | Details | Aluminum (Hydrophilic Golden coated) |
Expansion device | Capillary/EEV | | Capillary |
Material (IF capillary) | Details | Copper Tube |
PCB | PCB Protection: PU/ Protective layer | NA |
Temperature sensor Nos & Locations |
Gas/ Refrigerant Type | R-410a |
| NA |
Other | PFC: Active/passive | |
Gas/ Refrigerant Qty | KG | 1.15 |
Remote | Yes/No | Pcs | Yes |
RF / IR Based | Details | IR |
Frequency | MHz | 16 |
Operating Range | Meter | 8 |
Display | Yes/ No | LCD |
Packaging | Number of Ply: 3/5/7/Other | Details | 5 Ply |
GSM | GSM | Indoor: 908±10, Outdoor: 936 ±10 |
| Details | B+C |
BS (Bursting Strength) | psi | 160-180 |
EPS (Thermocol) Locations: Bottom, Side, Top, other (Pls Specify) | Details | IDU: Two Sides & ODU: Bottom & Top |