PARAMETERS | UNITS | RAC-26SH |
About MODEL | Type of AC : | Split / Window/Light Commercial/VRF/Chill | Details | Split |
Fixed Speed / Inverter | Fixed Speed |
Cool only/ Heat & cool | Cool only |
Product selling | Country name | Bangladesh |
Capacity: | Cooling capacity | Watt | 7034 |
Heating capacity | N/A |
Operating Conditions | Power supply | Rated Voltage & phase | Volts | 230V & Single |
Rated frequency | Hz | 50Hz |
Running Condition | Withstanding Operating conditions | °C | 20-43 |
Cooling Area | sq. ft | 180-240 |
Lowest running voltage | Volts | 170 |
Highest running voltage | 264 |
Cooling | Capacity at rated condition (If required) | Watt | 7034 |
Power consumption in rated condition | 2280 |
Performance | Cooling data | SEER/EER/COP (If any special requirement) | W/W | 3.08 |
Cooling Input Current | A | 10.7 |
Max. Input Current | 13.04 |
Indoor Unit Information | General | Indoor side airflow (High) | m3/h | 1100 |
Indoor side noise level (High) | dB(A) | 49 |
Dimensions (L*W*H) | mm | 1097 x 329 x 258 |
Packing (L*W*H) | 1175 x 405 x 310 |
Weight: Net & Gross | Kg | 17±0.5 & 19±0.5 |
Motor | Motor Type: Single-Phase Induction | Details | Induction (PG) |
Motors Mechanical output Wattage | Watt | 45 |
Capacitor | uF | 3 |
Indoor Fan speed (Turbo/High/Medium/Low) | r/min | 1220/1180/1100/1000 |
Thermal protector | Yes/ No | Yes |
Fan | Dimensions (Dia* Length) | mm | Φ108, L- 841±1 |
Material of Blades | Details | SAN 30% GF |
Evaporator | Rows * Tubes | No's | 2*17 |
Tube pitch (a) x row pitch (b) | mm | 21 x 12.7 |
Hairpin copper tube length | 892 |
Tube specification | ODΦ7.0 x 0.25+0.18 IGT |
Tube Material & Grade | Details | DHP COPPER, C12200 |
Fin spacing | mm | 1.2 |
Fin type | Details | Louvered |
Fin Material (Bare or Golden/Blue/Silver Coa | Aluminum (Hydrophilic Golden coated) |
Control board | Transformer Base/ SMPS Base | SMPS |
PU/ Protective layer | PU |
EMI/EMC compatible | NO |
| NO |
Display PCB: LCD Display/ 7Seg Display/ LED indicators | LED Digit Display |
Swing Motors: Qty, Purpose | 2, Left/right, Up/Down |
Temperature sensor: Nos & Locations | 2, air inlet, Eva inlet |
Other | Filter Type | Mesh Filter |
Power cord & Plug | Yes, 1.5 Meter |
Connecting wire between IDU & ODU: Leng | meter | 3.5 |
Connecting tube(CU with insulation) between | 3±0.05 |
Outdoor | General | Outdoor side noise level (Turbo/High) | dB(A) | 59-Turbo; 58-High |
Dimension : L*W*H (Including foot & service | mm | 865 x 370 x 687 |
Packing: L*W*H | 935 x 430 x 740 |
Weight: Net & Gross | Kg | 46±1 & 52±1 |
Max. discharge/Suction pressure | MPa | 4.30/1.30 |
Compressor | Preferred Model | Details | Lamda-QXA-F265F050 |
Type: Fixed speed / Inverter | Fixed Speed |
Inverter Frequency Range: Min to Max | Hz | N/A |
Locked rotor Amp(LRA) | A | 49.5 at 220V |
Thermal protector | Yes/ No | Yes |
Overload Protector (Location) | Details | internal |
Capacitor (If applicable) | uF | 50 |
Fan motor | Motor Type: Single-Phase Induction | Details | Induction |
Motors Mechanical output Wattage | Watt | 55 |
Capacitor | μF | 4 |
Outdoor Fan speed | R/min | 850 |
Thermal protector | Yes/ No | Yes |
Unit Information | Fan | Dimensions (Dia* Hight) | mm | Φ420, H-133 |
Number of Blades | No's | 4 |
Material of Blades | Details | ABS 20%GF |
Condenser | Rows*Tubes | No's | 2*15 |
Tube pitch(a)x row pitch(b) | mm | 21 x 12.7 |
Coil length | 800 OR; 775 IR |
Tube outside & Inside diameter | ODΦ7.0 x 0.25+0.18 IGT |
Tube Material & Grade | Details | DHP COPPER, C12200 |
Fin Type | Slit |
Fin spacing | mm | 1.2 |
Fin Material | Details | Aluminum (Hydrophilic Golden coated) |
Expansion device | Capillary/EEV | | Capillary |
Material (IF capillary) | Details | Copper Tube |
PCB | PCB Protection: PU/ Protective layer | NA |
|
PFC: Active/passive | |
Temperature sensor Nos & Locations | Details |
Other | Gas/ Refrigerant Type | R-410a |
Gas/ Refrigerant Qty | KG | 1.48 |
Remote | Yes/No | Pcs | Yes |
RF / IR Based | Details | IR |
Frequency | MHz | 16 |
Operating Range | Meter | 8 |
Display | Yes/ No | LCD |
Packaging | Number of Ply: 3/5/7/Other | Details | 5 Ply |
GSM | GSM | Indoor: 908±10, Outdoor: 936 ±10 |
| Details | B+C |
BS (Bursting Strength) | psi | 160-180 |
EPS (Thermocol) Locations: Bottom, Side, Top, other (Pls Specify) | Details | IDU: Two Sides & ODU: Bottom & Top |